GolfUpdated 8 min readBy zensportsy
How to Reshaft a Golf Club – ZenSportsy guide cover

Quick answer: To reshaft a golf club, remove the grip, heat the hosel to soften the epoxy (steel shafts) or use a shaft puller with gentle heat (graphite), pull the head off, clean out the old epoxy, prepare the new shaft tip, glue the head on with golf shaft epoxy and the correct ferrule, let it cure, cut the shaft to length from the butt end and fit a new grip. Reshafting is the best way to change flex, weight or length significantly, for example when a tall golfer needs clubs more than an inch longer; see the best golf clubs for tall men.

A shaft can break, feel wrong for your swing speed or simply be the wrong length. Rather than replacing the whole club, you can fit a new shaft to the existing head. Reshafting is a more involved job than regripping, but with the right tools and patience it is achievable at home. This guide walks through the process for steel and graphite shafts, explains when reshafting makes sense, and covers the mistakes to avoid.

When Should You Reshaft a Golf Club?

SituationWhy reshaft
Broken or bent shaftRestores the club without replacing a head you like
Wrong flexToo stiff or too soft shafts hurt distance and accuracy
Need much longer clubsTall golfers needing more than about 1″ extra length
Weight changeLighter graphite for slower swings, or heavier steel for control
Upgrading feelSwitch to a shaft profile that suits your tempo

For small length changes of an inch or less, an extension is simpler; see how to lengthen golf clubs. If you are not sure you need longer clubs, read do tall golfers need longer clubs.

Tools and Materials

Step-by-Step: How to Reshaft a Golf Club

Step 1: Remove the grip

Clamp the shaft in a rubber vise clamp and cut the grip off with a hook blade, cutting away from you. Remove the tape.

Step 2: Heat the hosel

Golf epoxy softens with heat. Apply heat evenly to the hosel (not the face or crown of woods) for short periods, rotating the club. Steel shafts can take more heat; graphite shafts are damaged by excessive heat, so use gentle heat and a shaft puller. Remove the ferrule first if it will melt.

Step 3: Remove the head

For steel shafts, once the epoxy softens, twist the head off while holding the shaft in the vise. For graphite, use a shaft puller, which pulls the head straight off without twisting, protecting the shaft fibres if you want to reuse it. Never twist a graphite shaft you plan to keep.

Step 4: Clean the hosel

Let the head cool, then remove old epoxy from inside the hosel with a reamer, drill bit or wire brush. Any leftover epoxy stops the new shaft seating properly.

Step 5: Prepare the new shaft

Check the manufacturer’s tip-trimming instructions for your club and trim from the tip if required. Abrade the part of the tip that will sit inside the hosel so the epoxy bonds: sand steel lightly, and remove the paint from graphite without cutting into the fibres. Slide on the ferrule.

Step 6: Dry fit

Insert the shaft fully into the hosel without epoxy to check the fit and alignment. Mark the shaft if you want logos aligned.

Step 7: Glue the head on

Mix the epoxy, coat the shaft tip and the inside of the hosel, then push the head on with a twisting motion to spread the epoxy. Seat it fully, with the ferrule pressed against the hosel. Wipe off excess epoxy and check alignment.

Step 8: Let it cure

Stand the club upright, head down, and let the epoxy cure for the time stated on the product, often 24 hours for full strength.

Step 9: Cut to length

Measure the playing length you want and cut from the butt end, allowing for the grip cap. For tall golfers, this is where you set the extra length. See how to measure golf club length.

Step 10: Fit a new grip

Apply grip tape, solvent and slide on the new grip. See how to regrip golf clubs.

Steel vs. Graphite Reshafting

Steel shaftsGraphite shafts
Heat toleranceHigherLow; overheating damages fibres
RemovalTwist off after heatingUse a shaft puller; do not twist
CuttingPipe cutterFine-tooth saw with tape
Tip prepLight sandingRemove paint only
Typical useIrons, wedgesWoods, hybrids, lighter irons

Choosing the Right Replacement Shaft

Reshafting for Tall Golfers

Tall golfers who need clubs more than about an inch longer than standard usually get better results from reshafting than from extensions. A new, longer shaft keeps the intended bend profile, and the club builder can add head weight or choose a shaft weight to keep swing weight reasonable. After reshafting, have the lie checked; longer clubs often need to be bent more upright. If you are replacing a whole set, compare the cost with ready-made tall sets in the best golf clubs for tall men.

DIY vs. Professional Reshafting

DIYRepair shop
ToolsHeat gun, puller, vise, reamerAlready equipped
RiskDamaged heads or shafts if rushedLow
TimeSeveral hours plus curingOften a few days
ExtrasLimitedSwing weight, lie and loft adjustment

If you are working with expensive heads or graphite shafts you want to keep, a professional is the safer choice. Fitters can also recommend the right shaft; see how to get fitted for golf clubs and how much a fitting costs.

Common Reshafting Mistakes

How Long Does a Reshafted Club Last?

A properly reshafted club with good epoxy and correct preparation should last as long as a factory-built club. Loose heads usually come from poor hosel cleaning or tip preparation. Store clubs dry and clean them regularly; see how to clean golf clubs and how to remove rust from golf clubs.

Reshafting Putters and Wedges

Putters can be reshafted to change length, hosel style or shaft material, and wedges are often reshafted to match the rest of an iron set. The process is similar, though some putter hosels use different tip sizes. See the best rated golf putters and the best golf wedges.

Safety Tips

Reshafting Cost Considerations

The total cost depends on the shaft, the grip and whether you pay for labour. Replacement shafts range from budget steel to premium graphite, and labour at a repair shop varies by location. For a whole set, compare the total with buying new clubs, especially if your heads are older models. For regripping costs, see how much it costs to regrip golf clubs.

Should You Reshaft or Replace?

If…Consider
You love the heads and they are in good conditionReshafting
Only one club is brokenReshafting that club
You need a full set much longerTall clubs or a full reshaft by a fitter
Your heads are old and wornReplacing the clubs
You are a beginnerA new set sized correctly

Checking Swing Weight After Reshafting

Swing weight describes how heavy the head feels during the swing. A new shaft of a different weight or length changes it. Club builders measure swing weight on a special scale and adjust it with tip weights, head weight or counterweights under the grip. Keeping swing weights consistent across a set helps every club feel the same.

Aligning Shaft Graphics

Many golfers like shaft logos aligned the same way on every club, usually facing up or down at address. Mark the desired position on the shaft before gluing and check it again as the head is pushed on. It is purely cosmetic, but it gives the set a professional finish.

Hosel Types: Bore-Through and Blind Bore

Some clubs have a blind-bore hosel, where the shaft stops inside the hosel, while others are bore-through, where the shaft runs all the way to the sole. Bore-through heads require the shaft tip to be trimmed flush with the sole after the epoxy cures. Check which type you have before ordering a shaft, because it affects how much shaft you need and how you finish the job.

Adjustable Driver and Hybrid Shafts

Many modern drivers and hybrids use adapter sleeves that let you swap shafts with a wrench instead of epoxy. In that case, “reshafting” means installing the sleeve on a new shaft, a job some golfers do at home with the right sleeve and epoxy, or buying a pre-fitted shaft. Make sure any replacement shaft has the correct sleeve for your brand and model.

Signs Your Shaft Needs Replacing

A damaged shaft can break during a swing, so replace it promptly. A loose head may only need re-gluing rather than a new shaft, using the same cleaning and epoxy steps described above. If you are unsure, a repair shop can inspect the club quickly and tell you whether the shaft is safe to keep.

Bottom Line

Reshafting lets you fix a broken shaft, change flex or weight, or make clubs significantly longer. Heat the hosel, remove the head (with a puller for graphite), clean and prepare everything carefully, epoxy the new shaft, cure, cut to length and regrip. For tall golfers who need a full set longer, compare reshafting costs with ready-made options in the best golf clubs for tall men.

Frequently Asked Questions

How do you reshaft a golf club?

Remove the grip, heat the hosel, pull off the head, clean out the old epoxy, prepare and glue in the new shaft, let it cure, cut to length and fit a new grip.

Can I reshaft my own golf clubs?

Yes, with the right tools and care. Graphite shafts need a shaft puller and gentle heat; expensive clubs may be better handled by a repair shop.

How long should epoxy cure when reshafting?

Follow the epoxy instructions; many golf epoxies reach full strength in about 24 hours.

Is it worth reshafting golf clubs?

It is worth it if you like the heads, need a different flex or weight, or need clubs much longer. For worn heads or full-set changes, new clubs may be better value.

Can reshafting make clubs longer?

Yes. Reshafting is the best way to add more than about an inch of length, which helps very tall golfers.

Do you need to trim the shaft tip?

Many shafts require tip trimming according to the manufacturer's chart for each club. Always check the instructions before cutting.

Leave a Reply

Your email address will not be published. Required fields are marked *