GolfUpdated 8 min readBy zensportsy
How to Regrip Golf Clubs – ZenSportsy guide cover

Quick answer: To regrip a golf club: secure the shaft in a vise with a rubber shaft clamp, cut off the old grip with a hook blade (cutting away from you), peel off the old tape and clean the shaft, apply a strip of double-sided grip tape, wet the tape and the inside of the new grip with grip solvent, slide the grip on firmly in one motion, align it square to the clubface and let it dry for several hours before playing. You will need new grips, grip tape, solvent, a hook blade and a vise or alternative clamp. For grip recommendations, see our guide to the best golf club grips.

Grips are the only part of the club you touch, and worn grips quietly hurt your game. Slick or hardened grips make you squeeze harder, which adds tension and affects your swing. Regripping at home is easier than most golfers think and can save money compared with paying a shop. This guide walks through every step, the tools you need, common mistakes and how often to regrip. If you would rather have a shop do it, see how much it costs to regrip golf clubs.

Regripping at a Glance

StepWhat to doTip
1. Secure the clubClamp the shaft in a vise using a rubber shaft clampNever clamp a bare graphite shaft
2. Remove the old gripCut it off with a hook blade, cutting away from youHook blades protect graphite shafts
3. Remove old tapePeel or scrape off all old tape and residueUse solvent to soften stubborn tape
4. Apply new tapeWrap or lay double-sided tape along the grip areaLeave a little overhang at the butt end
5. Add solventPour solvent into the grip and over the tapeUse enough to coat everything
6. Install the gripSlide the grip on quickly and firmlyPush until the butt end meets the shaft
7. Align and drySquare any alignment markings to the faceAllow several hours before use

Tools and Materials You Need

ItemPurposeAlternatives
New gripsReplace worn gripsChoose size and style before buying
Double-sided grip tapeHolds the grip in placePre-cut strips or rolls
Grip solventLubricates installation then evaporatesSome golfers use alternatives, but solvent is the standard choice
Hook bladeRemoves old grips safelyA utility knife with great care
Vise and rubber shaft clampHolds the club steadyA helper or a portable grip clamp
Rag and trayCatches solvent and cleans upOld towel and container

Most of these items are sold together in regripping kits. If you have not chosen your grips yet, see the best golf club grips.

Step 1: Secure the Club

Place a rubber shaft clamp around the shaft just below the grip and tighten it in a bench vise, with the clubface pointing straight up or square to your alignment reference. The rubber clamp prevents scratches and crushing. Never clamp a graphite shaft without protection, as it can crack. If you do not have a vise, ask a helper to hold the club firmly or use a portable grip clamp.

Step 2: Remove the Old Grip

Use a hook blade to slice the old grip lengthwise from the open end toward the butt, always cutting away from your body. The hook design lifts the rubber away from the shaft, reducing the risk of scratching it, which is especially important on graphite shafts. Peel the old grip off once it is cut. If you want to reuse the grip, you can carefully remove it with solvent and an air tool instead, but most golfers simply discard old grips.

Step 3: Remove the Old Tape

Peel away the old double-sided tape. Some tape comes off easily; stubborn tape can be softened with solvent or warmed slightly and scraped carefully. Clean the shaft thoroughly so the new tape sits flat. Any leftover lumps can make the new grip feel uneven. On graphite shafts, scrape gently to avoid damaging the finish.

Step 4: Apply New Grip Tape

Apply a strip of double-sided tape along the length of the shaft where the grip will sit, leaving about half an inch hanging over the butt end. Wrap it around the shaft so the edges meet without overlapping, or apply it as a spiral if you want to build up the grip size. Twist the overhang and tuck it into the butt end of the shaft to stop solvent getting inside. For a slightly larger grip feel, add extra layers of tape.

Extra tape layersApproximate effect
1 layer (standard)Standard grip size
2 to 3 layersSlightly larger feel
4 or more layersNoticeably larger; consider a midsize grip instead

Step 5: Apply Solvent

Cover the open end of the grip with a finger, pour in a generous amount of solvent and shake it around to coat the inside. Pour the solvent from the grip over the full length of the tape, catching any excess in a tray. The solvent activates the tape and acts as a lubricant so the grip slides on easily.

Step 6: Install the New Grip

Work quickly before the solvent evaporates. Squeeze the open end of the grip to widen it, push it over the butt end of the shaft and slide it on in one smooth, firm motion. Keep pushing until the end of the shaft meets the cap inside the grip. If the grip sticks part way, pull it off, add more solvent and try again.

Step 7: Align the Grip and Let It Dry

While the solvent is still wet, rotate the grip so any alignment marks or logos sit square to the clubface. Check from behind the club as if at address. Wipe off excess solvent and leave the club to dry, typically for a few hours, or overnight to be safe, before playing. Some solvents and tapes dry faster than others, so follow the manufacturer’s instructions.

How to Regrip a Putter

The process is the same, but alignment is even more important because many putter grips have a flat front that must sit square to the face. Take extra care to check alignment from address. Oversize putter grips can need more solvent and firmer pressure to install. For putter-specific options, see the best golf club grips and best rated golf putters.

Common Regripping Mistakes

Choosing the Right Grip Size

Grip sizeWho it suitsEffect
UndersizeSmaller handsMore hand action
StandardMost golfersNeutral
MidsizeLarger hands, golfers wanting less hand actionQuieter hands
Jumbo / oversizeVery large hands, arthritisReduces grip pressure needed

Grip size affects how much your hands release through impact. Grips that are too small can encourage overactive hands, while grips that are too large can restrict release. A fitter can measure your hand size; see how to get fitted for golf clubs.

How Often Should You Regrip?

A common guideline is to regrip about once a year or roughly every 40 rounds, whichever comes first. Golfers who practise often, play in hot climates or store clubs in a hot car may need to regrip more often. Signs it is time include grips that feel slick or hard, visible cracks, shiny worn patches and the need to grip harder to control the club. For more on club lifespan, see how long golf clubs last.

DIY vs. Shop Regripping

OptionProsCons
DIYLower cost per club, convenient, satisfyingNeed tools and practice
Golf shop or fitterProfessional result, no tools neededLabour charge on top of grips

Once you own the tools, DIY regripping usually costs less per club. If you only regrip occasionally or have expensive graphite shafts you are nervous about, a shop may be worthwhile. See how much it costs to regrip golf clubs for typical cost tiers.

Caring for Your New Grips

Clean grips regularly with warm water, mild soap and a soft brush, then rinse and towel dry. This removes oils and dirt that make grips slick. Avoid leaving clubs in a hot car boot for long periods, which can harden rubber. For a complete cleaning routine, see how to clean golf clubs.

Types of Golf Grips

TypeFeelBest for
RubberSoft, tackyMost golfers
CordedFirm, excellent tractionHot or wet conditions, faster swings
Hybrid (cord and rubber)Traction on top, softness belowGolfers wanting a blend
Wrap-styleLeather-like spiral feelTraditional feel
Oversize putter gripsLarge, stableGolfers wanting quiet hands on the green

Compare popular models in the best golf club grips.

Can You Regrip Graphite Shafts at Home?

Yes, with care. Always use a rubber shaft clamp, use a hook blade rather than a straight knife and avoid aggressive scraping when removing old tape. Graphite shafts are strong in normal use but can be damaged by clamping pressure or deep scratches, so take your time.

Matching Grips Across Your Set

Most golfers use the same grip model and size on every full-swing club for consistency, with a separate putter grip. If you change grip size, change the whole set at once so every club feels the same in your hands. Some golfers choose slightly different grips for wedges, but consistency is usually the best starting point.

Regripping Checklist

Regripping and Swing Weight

Grip weight affects how heavy the clubhead feels. A heavier grip can make the head feel lighter, while a lighter grip can make it feel heavier. Most golfers will not notice small differences, but if you switch to much heavier oversize grips, your clubs may feel different. A club fitter can check swing weight and adjust if needed. If you are also thinking about new shafts, see the best golf club shafts and how to reshaft a golf club.

Key Takeaways

Bottom Line

Regripping your golf clubs is a simple, money-saving job that can improve your control and comfort. With the right tools and a careful, step-by-step approach, you can regrip a full set in an afternoon. Choose a grip size and style that suit your hands, install it carefully and let it dry fully. For grip recommendations, see our guide to the best golf club grips.

Frequently Asked Questions

How do you regrip a golf club?

Clamp the club, cut off the old grip, remove the tape, apply new double-sided tape, coat it and the grip with solvent, slide the grip on, align it and let it dry.

What do I need to regrip golf clubs?

New grips, double-sided grip tape, grip solvent, a hook blade, and a vise with a rubber shaft clamp or another way to hold the club steady.

How long should new grips dry?

Several hours is typical; overnight is safest. Follow the solvent manufacturer’s instructions.

How often should I regrip my clubs?

About once a year or every 40 rounds, or sooner if grips feel slick, hard or cracked.

Can I regrip graphite shafts myself?

Yes, but use a rubber shaft clamp, a hook blade and gentle tape removal to avoid damaging the shaft.

How do I make my grips bigger?

Add extra layers of tape under the grip or choose a midsize or jumbo grip.

Leave a Reply

Your email address will not be published. Required fields are marked *